SCN R8 cannot view/access remote sites

[dmlipat]

We are able to configure scn with 5 different sites. Site to site calls are successful. But it cannot view in manager the other sites. I already enable scn discovery and system are running on R8.0(16). However i can login to other sites one a time by manually entering the ip address. H.323 trunk was set to ip office scn with direct media path enable.

 

[TheSmash]

File>Preferences>Discovery

In the IP Search Criteria, enter each IPO's IP address separated with a semi-colon.

ACSS (SME)

One of these days everything will work as it should, and then we'll all be out of a job!

 

[amriddle01]

Broadcasts do not traverse multiple networks or subnets, you need to tell it the address as Smash mentioned

 

[dmlipat]

thanks a lot smash, i can access the wholes site.
I was thinking that when scn discovery was enable that was it, it should get things done.im glad i was wrong here..:->

 

[TheSmash]

No pink love...?

ACSS (SME)

One of these days everything will work as it should, and then we'll all be out of a job!

 

[hairlessupportmonkey]

you can also use the "Known Units" feature too. handy when managing lots og sites.

ACSS - SME
General Geek

 

[tlpeter]

I always set the known units.
You cannot know all IP addresses and you only have to do a search and the systems shows up (when connoected to the site)


BAZINGA!

I'm not insane, my mother had me tested!

 

[Morrack]

First time I configured this, I was puzzled about why it wouldn't work for me in spite of setting it up exactly as directed in the manual. If you have the Unit/Broadcast Address (drop down in lower left corner of Select IP Office dialogue box) set to anything other than 255.255.255.255 this setting will override all the discovery information you carefully configured. Thought I would mention it in case anyone comes across this thread and has the same issue.


Peter Sherwood
Morrack Consulting
Affordable World Class Off-site Backup!

http://www.morrack.com