I have several 500v2 control units on 9.1.4 connected to each other via SCN over websocket. It is not SE. When I add users to a hunt group, if the user is local to that control unit, it keeps the change. If I add a remote user from any of the other control units, as soon as I press ok, it removes the remote users from the group. It happens no matter which IPO the group is configured on. Any idea what might cause this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCN advertised hunt groups won't save remote users 1
- Thread starter John563
- Start date
-
1
- #2
TouchToneTommy
Vendor
It's a bug. It you export the config, the extensions are there in the spreadsheet. If you add the users, merge, then open the config on their home system, they are there. Try using 9.1.3 Admin Lite installed to its own folder as a work-around until it is solved.
- Thread starter
- #3
- Status
