Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCN 8.0, 8.1 and 9.0

Status
Not open for further replies.

pdob

Technical User
Oct 25, 2005
33
US
Hello All,

We are adding new IP500 on firmware 9.0 to our new offices. We have total 12 offices on SCN with mixed of 8.0 and 8.1

Has anyone ran into issue over the SCN with 8.0, 8.1 and 9.0? Is this still supported?

We don't really want to upgrade all of the sites to 9.0 cause of "dollars" :)

Thanks in advance.
 
8.1 to 9.0 Support. 8.0 to 9.0 not supported. They must be within the 1 major release of each other. Not to say that it won't work. Because I know many sites that are not within the 1 major release of each other and they work fine. But if and when you have issues, there will be no "support" plan of action.



NTS Direct
 
That's what I thought. Thnx mkoker.
 
I thought 8.x and 9.x are supported because the first digit is the main release.

But I might be wrong
 
Only thing I'd be worried about is VMPro.
Have it on latest R8.1 or R9.0, but not R8.0.


Kind regards

Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem

2cnvimggcac8ua2fg.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top