SCH 1214 ERROR

[eileenc]

I have two identical phones I am building, but the second one is getting the following error:

CLS Response: DPUA FBD FITD MWA NI Error Code: SCH1214
(SCH1214)

Any help would be appreciated.

 

[Splic3d]

SCH1214 VMBA package #246, is not equipped.

Could you post the tnb for the sets.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti

 

[eileenc]

TN 004 0 08 01
DATE
PAGE
DES

DES 6019
TN 004 0 08 01
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
MRT
ERL 0
FDN 7595
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBA WTA LPR MTD FNA HTA TDD HFA GRLD CRPA STSD
MWA LMPN RMMD AAD IMD XHD IRA NIA OLA VCE DRG1
POD SLKD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTA CLBD AUTU
GPUD DPUA DNDA CFXD ARHD FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
CDMR PRED RECD MCDD T87D SBMD
PKCH CROD ELCD
CPND_LANG ENG
RCO 0
EFD 7595
HUNT 7595
EHT 7595
LHK 1
LPK 6
PLEV 02
PUID
UPWD
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7433 0
CPND
NAME JUDGE, CHAMBERS
XPLN 21
DISPLAY_FMT FIRST,LAST
01 SCR 6433 0
CPND
NAME JUDGE, CHAMBERS
XPLN 21
DISPLAY_FMT FIRST,LAST
02 SCR 7434 0
CPND
NAME JUDGE, CHAMBERS
XPLN 21
DISPLAY_FMT FIRST,LAST
03 ADL 16 4124315657
04 SCR 7436 0
CPND
NAME JUDGE, CHAMBERS
XPLN 13
DISPLAY_FMT FIRST,LAST
05 DIG 17 1 R
06 ADL 16
07 ADL 16
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 7595
17 TRN
18 AO6
19 CFW 4
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 29 JAN 2013

 

[eileenc]

I have VMBA equipped

 

[StanleySteamer]

It appears you are trying to make the set change with Telephony Manager. It may be that the feature list in TM is not synced with the switch.
Have you tried using the command line?

 

[eileenc]

No, I do all my changes through Telephony Manager. I am doing a bunch of them - this is the only phone not going through, which is why I am stumped.

 

[StanleySteamer]

I vaguely recall having this problem with TM. There may be a TM patch to fix it but if I remember, I got around it by going into the TM site customer features and unchecking the VMBA feature.
Another option might be to turn off the validation function in TM.
Otherwise, you will have to make the change from the command line.

 

[eileenc]

Thanks. I will try that. It is validating fine, so I will try turning off the feature first.