UnderTheBusAsUsual
Systems Engineer
Hello IP Office Gurus, hope you are all keeping well in this odd time in which we live. Ive just recently installed a Vega 60G unit to replace 4 x ISDN2e's into a Doctors Surgery (because it was cheaper than upgrading to a V2 chassis and R11 (apparently). We have had a number of issues with this unit just absolutely crashing. A reboot clears the issue temporarily, however after a period of time, the unit locks up again. We have had a number of calls with the manufacturer, in which I have explained that their box should just emulate an NTE and we should not have to do anything further apart from plug it in, but they are insistent that it is the phone system
Do any of you guys have any little tweaks I could try within the IPO to try and resolve this.
All TEI's checked, patch leads changed, protocols match, etc etc etc.
Thanks in advance.
Should have been a Bus mechanic seeing as I spend so much time under them.
Do any of you guys have any little tweaks I could try within the IPO to try and resolve this.
All TEI's checked, patch leads changed, protocols match, etc etc etc.
Thanks in advance.
Should have been a Bus mechanic seeing as I spend so much time under them.