Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

S8500

Status
Not open for further replies.

DTLegend

Programmer
May 14, 2007
30
US
I have an S8500 with C360 configured with the addresses of S8500= 198.152.254.241
C360 = 198.152.254.240
UPS = 198.152.254.239

I have the S8500 configured to be the DHCP and the IPSI is not getting an address. It is a Multi-Connect 4.0

Also I am unable to login to the CM portion through putty. I can login to the shell but when I type "autosat" I get access denied. I also loaded the latest ASA 4.0 and made a profile to connect and it is not allowing me access. I created a login via web interface Administrator Accounts tab. I can use dadmin login and password I created and access via putty but not to CM.

Any suggestions?

Thanks!
 
Did you get this taken care of, if not I can help


TM
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top