Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

S8300: Add a route-pattern?

Status
Not open for further replies.

pichels

Technical User
Aug 1, 2005
313
0
0
US
Hi-

I've searched the forum and can't find any post related to adding a "new" route-pattern?
Anyone help us?
Thx.

-P
 
Hi-

I'd like to create a new route - if needed.
We have an Avaya Phone user that needs to call out to a cell phone that is not working with the current route/ARS.
Get a recording that states "Your call cannot be completed as dialed - please hang up and try your call again or contact customer service...0414.." (repeats)


1.
ARS analysis:

1XXX551 11 11 201 fnpa n

Trunk group:
list trunk-group 11

TRUNK GROUPS

Grp No. Out Que
No. TAC Group Type Group Name Mem TN COR CDR Meas Dsp Len

11 711 isdn Outgoing 23 1 1 y none n 0


2.
Route Pattern:

change route-pattern 201 Page 1 of 3
Pattern Number: 201 Pattern Name: CR 551
SCCAN? n Secure SIP? n
Grp FRL NPA Pfx Hop Toll No. Inserted DCS/ IXC
No Mrk Lmt List Del Digits QSIG
Dgts Intw
1: 11 3 200 1XXX n user
2: n user
3: n user
4: n user
5: n user
6: n user

BCC VALUE TSC CA-TSC ITC BCIE Service/Feature PARM No. Numbering LAR
0 1 2 3 4 W Request Dgts Format
Subaddress
1: y y y y y n n bothept locl-pub none


3.
Here is the trace:

list trace station 6324 Page 1

LIST TRACE

time data

12:46:06 active station 6324 cid 0x14c
12:46:06 G711MU ss:eek:ff ps:20 rn:1/1 192.168.101.122:2726 192.168.101.15:2670
12:46:06 xoip: fax:pT modem:pT tty:US 192.168.101.15:2670 uid:0x907
12:46:07 dial 91XXX551 route:pREFIX|FNPA|ARS
12:46:07 term trunk-group 11 cid 0x14c
12:46:07 dial 91XXX5511894 route:pREFIX|FNPA|ARS
12:46:07 route-pattern 201 preference 1 cid 0x14c
12:46:07 seize trunk-group 11 member 16 cid 0x14c
12:46:07 Setup digits 1XXX3195511894
12:46:07 Calling Number & Name XXX2731776 NO-CPName
12:46:07 Proceed trunk-group 11 member 16 cid 0x14c
12:46:15 idle station 6324 cid 0x14c



Thx.

-P
 
you don't really 'add' new route patterns. you need to find an unused one (list route) and then change it

regards

frank
 

Ok - a bit confusing since we have these odd numbers:

36
100
200
201

How are they created or where do they come from in that table?
Thx.

-Scott
 
Thanks - got it.
I can just enter ch route-pattern <num> --> Press F5(help) - up to 254.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top