Rolm 9751 / Hicom 300 Manuals and Security 1

[jkoh]

I've crawled the net trying to find any configuration manuals, best practices / standards, or documentation on the Rolm 9751 to no avail. Can anyone help me locate or provide the link to these documents?

Thanks in advance!

 

[strmwalker]

jkoh...what exactly are you looking for.manuals documentation are what?i have many i used to work for ROLM
CORPERRATION AND IBM.i am what they call a old ROLMAN.

let me know what it is you are looking for.

strmwalker

 

[strmwalker]

jkoh..are you looking for info on the 9751 release 9005
or 9751 9006 product?

strmwalker

 

[jkoh]

Strmwalker -- thanks for your quick reply, I came back from vacation. I am looking for info on both releases, 9005 and 9006. I have end-user manuals on how to use single-line telephones but I need information on the administrative / management / technical side. I find it absurd that websites are trying to sell the material!

Thanks in advance!

 

[strmwalker]

jkoh..when you say administrative do mean moves adds changes
if so you would be looking for a 9751 9005 config manual
on the 9006 product emml manual the hicom 9006 uses direct
amo.

strmwalker

 

[PERRYPJ]

I HAVE ABOUT EVERYTHING IN PDF FORM, THE 9005 CONFIG IS 3.43MB DO YOU HAVE EMAIL THAT CAN RECEIVE FILES THAT BIG AND BIGGER

OLD ROLMEN WORKING ON NORTELS

 

[russ05]

Hi strmwalker,

Could you provide me with some instructions or step on how to get the configuraton off ROLM 9571 mod 10?

Thanks,

Russ05

 

[PERRYPJ]

IF YOU WANT WHAT THE SWITCH IS EQUIPT WITH GO INTO CNFG AND DO A LIST MAP ALL, FOR SOFTWARE OPTIONS DO A LIST OPTIONS FROM THE COMMAND LINE

OLD ROLMEN WORKING ON NORTELS

 

[strmwalker]

russ05..what are you looking for?phones by types like
rp120_button table,rp240_button tables and rp400_botton
tables.li lex exten_all gives all you extensions fowarding
targets and line appearences.you can do a cou rp120.cou
rp240 cou rp400 counts phones by types.you can li trunk_g
list you trunk groups. li sear shows you your trunk groups.
li map all will list cards and shelf and slots. all of this
will be done in cnfg. hopes this helps.you need more info
post it i will glad to help in any way i can.


strmwalker