rollover question 1

[jp61616]

I have a phone that does not roll over correctly. I know it is something simple, but I cannot figure it out.
I have EFD set to 5577, but when I call the phone from a cell and let it ring it rolls to 5350. Why does it do this?

NACT
REQ: prt
TYPE: tn
TYPE TNB
TN 4 0 13 15
DATE
PAGE
DES

DES ADMISN
TN 004 0 13 15
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 5577
TGAR 1
LDN 0
NCOS 0
SGRP 0
RNPG 12
SCI 0
SSU 0000
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFD
MWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LND CNDA
CFTA SFA DDV CNID CDCA
ICDD CDMA MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD PGND FLXD FTTU
CPND_LANG ENG
RCO 0
EFD 5577
HUNT 5350
EHT 5350
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 6350 0 MARP
CPND
NAME ADMISSIONS/HAA
XPLN 14
DISPLAY_FMT FIRST,LAST

 

[GHTROUT]

I don't see Class of Service Roll Over Allowed, or the Roll Over key.

That's because Dogs roll over. Why not start calling features by their name so there is no question if you mean Hunt, Call Forward, Forward No Answer, External Hunt, External Forward No Answer or the other 5 or so things "roll over" might mean.

Some phone in the mix, which we can't see is probably Call Forwarded to 5350


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[telebub]

Go to LD 21 and print your RDR data. See what your FNAT, FNAD, and FNAL are set to.

LD 21
REQ: PRT
TYPE: RDR
CUST: 0

I bet your FNAD, FNAT and FNAL are set to HUNT instead of FDN.

War Eagle!
Lions Baseball '09!

 

[GHTROUT]

Also verify the Bounce is right.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[jp61616]

Telebub, you were right, fnat was set to hunt, changed it to fdn and it works now ! ``thanks.

 

[GHTROUT]

Well, someone has to thank telebub - so I hereby roll over a bounce to you.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]