Rollover lines on 2008

[plab1]

I have a 2008 that will not rollover. Key 00 is 5670, key 01 is 4670. 5670 will not rollover or go to VM & gives busy signal when in use. 4670 will go to VM. I OUTed the existing TN & copied over another 2008. Rollover worked until I changed the DN back to 5670. What have I missed?

 

[johnpoole]

are you talking hunt (when busy) or fna (unanswered)? Nortel's don't roll over (square switch). if your lines are in sequence, lhk= (last line key) (last hunt key) will create a short hunt on a set, cls must =hta.. fdn=(ext of vm) will make a set forward no answer to the target. cls must =fna

john poole
bellsouth business
columbia,sc

 

[plab1]

FDN = 5666 (VM)
CLS = FNA & HTA
HUNT = 5666
LHK = 0 or 1 (I've tried both)

 

[johnpoole]

lkk =1 hunts from key 0 to one, post the set if it still don;t work. make sure the #'s are marped on your set

john poole
bellsouth business
columbia,sc

 

[plab1]

I was missing MARP on Key 00. Thank you, it worked!

 

[acewarlock]

5670 then is on someone elses phone to, do you want that?

 

[plab1]

yes. we have 2 attendant consoles which can pick up calls for 5670.