carlsontech
Technical User
Can someone tell me the command to restart the system link feed in CMS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Restart system feed link in CMS
- Thread starter carlsontech
- Start date
- Status
- Thread starter
- #3
carlsontech
Technical User
Is there a command in the CMS to do this or a way to reset the link from the CMS system?
Use system setup --- data collection enter the acd number select off and modify then select on and modify.
That will reset the link
or select maintenance - acd status enter the acd number and select translations.
That will do it too
"Been there, done that and got the teeshirt
That will reset the link
or select maintenance - acd status enter the acd number and select translations.
That will do it too
"Been there, done that and got the teeshirt
You are getter off doing a translation pump up. To perform translation pumpup connect to your CMS with emulation. Go to maintenance and choose ACD status press enter this will take you to the right side choose translations and press enter this will force a connection.
- Status
Similar threads