Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

resource temporarily unavailable making recover on different client

Status
Not open for further replies.

tekkanet

Technical User
Jun 27, 2005
80
IT
networker 7.3.2
trying to recover on host oldtrade the backup of tradebl with
nwrecover -c tradebl
command
I go through selection, I see that the tape is mounted but inside the recovery window I get:

Recovering 179014 files into their original locations

Volumes needed (all near-line):
000024 at PV132T
Requesting 179014 file(s), this may take a while...
nwrecover: recover of rsid 1585528359 failed: nwrecover: Resource temporarily unavailable
nwrecover: Didn't recover requested file ./raid5/092p2/.bash_history
nwrecover: Didn't recover requested file ./raid5/092p2/.bash_logout
nwrecover: Didn't recover requested file ./raid5/092p2/.bash_profile
nwrecover: Didn't recover requested file ./raid5/092p2/.bashrc

...

./raid5/stat/z9root/08280an01.sdd
nwrecover: Could not send indication to jobd.
nwrecover: SYSTEM error: Invalid argument
nwrecover: Didn't recover requested file ./raid5/stat/z9root/
nwrecover: Could not send indication to jobd.
nwrecover: SYSTEM error: Invalid argument
nwrecover: Didn't recover requested file ./raid5/stat/
nwrecover: Could not send indication to jobd.
nwrecover: SYSTEM error: Invalid argument
nwrecover: Didn't recover requested file ./raid5/
Received 0 file(s) from NSR server `bcksrv.siziano.peviani.it'
Recover completion time: mer 27 giu 2007 10:56:46 CEST
Recover operation failed.
nwrecover: SYSTEM error: Invalid argument


If I do it on the client itself it succeeds...
What could it be the problem?
Thanks in advance,
Gianluca
 
Same failure using directed recovery from the backup server:
[root@bcksrv root]# recover -s bcksrv -c tradebl -R oldtrade -iY /raid5
recover: Current working directory is /raid5/
recover> ls
092p2 09test fatture nohup.out stat
09prova banaec1 lost+found restore
recover> cd 09prova
recover> add transedi.sh
1 file(s) marked for recovery
recover> list
/raid5/09prova/transedi.sh @ Sat Jun 23 20:36:02 2007
1 file(s) marked for recovery
recover> recover
Initiating remote recover to oldtrade from server bcksrv, this may take a while...
recover: recover: Total estimated disk space needed for recover is 4 KB.
recover: recover: Recovering 1 file into its original location
recover: Requesting 1 file(s), this may take a while...
recover: recover: recover of rsid 1585528391 failed: recover: Resource temporarily unavailable
recover: Didn't recover requested file ./transedi.sh
recover: Received 0 file(s) from NSR server `bcksrv'
recover: Recover completion time: mer 27 giu 2007 12:19:13 CEST
recover:
recover>
 
What if you try to recover the file to your backup server then? Same result or does it work? Anything in the logs that can give a clue?
 
If I recover directly on the client where the backup was taken using the recover command is ok. Not tried on bcksrv itself...
In the mean time I solved the problem mounting via nfs the oldtrade file system under /raid5_oldtrade on tradebl and using the recover command to "relocate" the files...
recover -s bcksrv -c tradebl -d /raid5_oldtrade -iN -a /raid5

and it completes without prroblems....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top