Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Resetting 9621g phones

Status
Not open for further replies.

High Mesa

Vendor
Sep 18, 2021
43
US
Have a customer that we just shipped a couple of 9621g for their remote workers. When one of the users got their phone they proceeded to plug it in, and entered the wrong extension number. Trying to get it reset to factory settings but nothing doing. Every time if comes up but does not ask for extension number and login code. something missing in manager? Thanks
 
Without telling us what they are doing to reset it we wouldn't know. Are they going into the Admin menus and selecting Administration | Reset to Defaults.

Stuck in a never ending cycle of file copying.
 
if you default it then there are no settings left in the phone
call server, file server need to be put back in, otherwise it will not connect.

If you enter the wrong number then go into the CRAFT menu and go to the LOGOUT option instead of going nuclear on the phone then it will ask you again for the extension and password. :)

Joe
FHandw, ACSS, ACIS

 
Logout! That's what I was looking for. Did not know that that would cause it to forget extension. Thanks
 
Well that didn't work, the phone just ask to verify that you want to logout and you press the logout button again and it just keeps bring back the same screen, " are you sure you want to logout". Any suggestions
 
Try the 'CLEAR' option, this cleares all values and resets it to factory. If it's still not allowing you to log in then the phone firmware might be cooked.

Cheers,
BFG9K
Avaya IPO/ACCS Technician
Melbourne, Australia
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top