Reset of a FastRad on MICS 6.0

[Rapetou]

Someone can tell me how i can reset the password of my fastrad on a MICS ver. 6.0. I've tried the procedure on FAQ and it doesn't work. I have ever try it on an other one with MICS T1 ver. 1.0 and the password has been reset with no problem but not with the latest upgrade...

Any ideas?

 

[curlycord]

There was 2 FAQ's on how to debug a RAD...did you try them both?

http://www.spoctel.com

 

[Rapetou]

Yes, I have tried both...

I have now 2 options:

Short the 5Volts 1uF to erase all memory of the FastRad or plug it to an other KSU with ver. T1 1.0...

Buth remotely i don't have any options and i have 4.5 hours of traveling between me and the FastRad...

 

[curlycord]

Maybe it defaulted? ask customer to do the F9** and see if it asks for a password and if not get them to put one in....I have had a couple RADs default on me before.

http://www.spoctel.com

 

[mmazza]

I have FAQ posted on here that works for debuggin a fastrad. It should reset all defaults..
Mario Mazza
Telecommunications Specialist

 

[Nortech1]

use a M7310
change date to April 15, 1999
F9**
hit left display key 5 times
hit center display key 6 times
hit right display key 8 times
press HOLD
press digit 2
press digit 1
press release/RAD now at
reset date

 

[jerryreeve]

nortech1,
by that do you mean that the password is 3151999 ? or 03151999 ? just wanted to verify what you said earlier. JerryReeve
Communications Systems Int'l
com-sys.com

 

[salo0920]

The trick here is that the code to reset the rad CHANGES daily. In order to use the above sequence, you need to change the system date to 4/15/1999 BEFORE you do the reset.