Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Res 3700 error - Unknown unsupervised abort code

Status
Not open for further replies.

POSN

IS-IT--Management
Jul 11, 2016
112
US
20200824_182240_pcurv9.jpg

Recal didn't fix it. Only occurring on this terminal when it prints.
 
This is usually from a windows update on the workstation. Its typically one you cant uninstall either.
You can do a factory reset of the workstation(must be the bios reset)
Or can try this;
For workstation 620 & 650 you must copy ntidn.sys from 5.5 installation disk (System32\Drivers) to C:\Windows\SysWOW64\drivers and reboot workstation.
After reboot you will have no problem.
Once you reset make sure the workstation is set to check for updates but not download or install.
Look for port driver updates and exclude/hide them.
 
Review the mdshost.xml file en the Workstation, maybe is with an old information.
Copy a new mdshostfile.xml updated file from the server.

Regards.
Mirko
 
Two possible causes

you must copy ntidn.sys from the 5.5 installation disk (System32\Drivers)

Windows update Exar Corporation - Ports driver update. This update removal hard lot of entry. Better format and windows update to disable.

Re cal

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top