Report

[Westbrook]

Anyone know how to get a report form Nortel BCM 400/1000e that shows configuration?

Speaking in avaya terms something similiar to list configuration, list trunk, display trunk, etc.

i see i can drill into the media bay modules 1 by 1 but no report displays this in summary.

 

[cmawbey]

there is a way to gather all the configuration data to either a HTML or Excel sheet

first connect to the BCM
in element manager select SESSION ( this is found at the top of the screen )
then select SAVE PROGRAMMING RECORD
you can then select "selected data or config/admin data or all data"
i would suggest ALL DATA
this will take at least 45 minutes to complete but safe to do on a live system
select YES on the warning page
select OK on the SAVE DATA page
select a location to save the file to
give the file a name
at the bottom choose what format you want, i.e EXCEL or HTML


this will give you a hard copy of your entire systems config and setup

 

[Westbrook]

running bcm 3.6 software, not seeing the steps you outlined...

 

[cmawbey]

Ah sorry i just assumed you were running a newer release... not sure how to do that on 3.7

 

[Westbrook]

thanks for the help. below are screenshots of interface.

 

[pkellow]

Logon.
Click on system, then tools.
Then you should be able to refresh and display.
However this will only show a very high level view.
Beyond this, upgrade to 4.0. The save programming data does not exist on 3.x, however does on 4.0 & 450.