Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Report

Status
Not open for further replies.

Westbrook

MIS
Jan 4, 2008
25
US
Anyone know how to get a report form Nortel BCM 400/1000e that shows configuration?

Speaking in avaya terms something similiar to list configuration, list trunk, display trunk, etc.

i see i can drill into the media bay modules 1 by 1 but no report displays this in summary.
 
there is a way to gather all the configuration data to either a HTML or Excel sheet

first connect to the BCM
in element manager select SESSION ( this is found at the top of the screen )
then select SAVE PROGRAMMING RECORD
you can then select "selected data or config/admin data or all data"
i would suggest ALL DATA
this will take at least 45 minutes to complete but safe to do on a live system
select YES on the warning page
select OK on the SAVE DATA page
select a location to save the file to
give the file a name
at the bottom choose what format you want, i.e EXCEL or HTML


this will give you a hard copy of your entire systems config and setup
 
running bcm 3.6 software, not seeing the steps you outlined...
 
Ah sorry i just assumed you were running a newer release... not sure how to do that on 3.7
 
thanks for the help. below are screenshots of interface.

zdqx.jpg


263wpon.jpg
 
Logon.
Click on system, then tools.
Then you should be able to refresh and display.
However this will only show a very high level view.
Beyond this, upgrade to 4.0. The save programming data does not exist on 3.x, however does on 4.0 & 450.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top