Replacing TN747 with TN429

[drew31fan]

When attempting to build a new CO trunk group using a TN429D, I'm getting a message saying object and port types are inconsistent when I try to program the port assignments. Any suggestions?

 

[AvayaTier3]

Hardware platform? Definity/CM software version?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[drew31fan]

Definity G3 platform

 

[jimbojimbo]

TN429 supports CAMA/DIOD. Assuming you are talking about US so probably DIOD. Assuming you have the correct carrier provisioning for inbound/outbound CLID.

 

[AvayaTier3]

Determining CM software versions and hardware platforms

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[drew31fan]

I did attempt to set the trunk type as DIOD, but my signaling options are immediate or wink and these are standard ground-start trunks so I don't think it's going to work.

 

[AvayaTier3]

Hardware platform? Definity/CM software version?

See link above

display system-parameters customer-options               Page   2 of   8   SPE B
                                OPTIONAL FEATURES

    Abbreviated Dialing Enhanced List? y              Attendant Vectoring? n
        Access Security Gateway (ASG)? n          Audible Message Waiting? y
        [b][COLOR=#CC0000]Analog Trunk Incoming Call ID? y[/color][/b]              Authorization Codes? y
---------------------------------------------------------------------------------
add trunk-group 2                                               Page   1 of  11
                                TRUNK GROUP

Group Number: 2                    Group Type: co            CDR Reports: y
  Group Name: OUTSIDE CALL                COR: 85       TN: 1        TAC: 82
   Direction: two-way        Outgoing Display? n
 Dial Access? n                Busy Threshold: 99          Night Service: 744
Queue Length: 0           Country: 1                Incoming Destination: 744
   Comm Type: voice                 Auth Code? n   Digit Absorption List:
    Prefix-1? y                   Trunk Flash? n         Toll Restricted? y

TRUNK PARAMETERS
            Trunk Type: loop-start
    Outgoing Dial Type: tone                              Cut-Through? n
     Trunk Termination: rc                    Disconnect Timing(msec): 500

            Auto Guard? n    Call Still Held? n     Sig Bit Inversion: none
     Terminal Balanced? n                               RA Trunk Loss: 0db
                                  Trunk Gain: high

 Disconnect Supervision - In? y  Out? n                 Cyclical Hunt? n
 Answer Supervision Timeout: 10            Receive Answer Supervision? n
add trunk-group 2                                               Page   2 of  11
TRUNK FEATURES
          ACA Assignment? n            Measured: none
                                                          Maintenance Tests? y
                               Data Restriction? n

   Abandoned Call Search? n
   Suppress # Outpulsing? n

       Charge Conversion: 1
           Decimal Point: none
         Currency Symbol:
             Charge Type: units       [b][COLOR=#CC0000]Receive Analog Incoming Call ID: Bellcore[/color]
[/b]                                               Per Call CPN Blocking Code:
                                             Per Call CPN Unblocking Code:

            Outgoing ANI:

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]