Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing a phantom superloop

Status
Not open for further replies.

AbneyTim

Technical User
May 10, 2011
13
US
I'm having a problem removing a phantom superloop, all the TNs have been removed but I still get:
REQ chg
TYPE supl
SUPL x164
SCH5743
SUPL

REQ: prt
TYPE: tnb
TN 164
CDEN
CUST
DATE
PAGE
DES

SCH0802

Anyone seen this or have a solution? Thanks for any input.
 
@buddy yes I did try that

REQ chg
TYPE supl
SUPL x n164
SCH2100
 
probably won't work(?) but I've never had a reason to smoke a phantom loop, so who knows - have tried to x it out of CFN 1 cequ in ld 17 at the SUPL prompt?

Mato' Was'aka
 
@BI I've never removed one either but we added 2 more groups to the switch so we moved our phantom loop out to 252.

I tried that but don't get a SUPL prompt in LD17.

REQ chg
TYPE cequ
MPED
TERM
TERD
TERQ
XCT
TDS
CONF
MFSD
DLOP
PRI2
DTI2
EXT0
EXT1
 
well, the SCH 5743 says
SCH5743
Cannot remove a superloop that is not empty.
Action: Remove all TNs assigned to this superloop first.
Severity: Info


and SCH0802


SCH0802
Specified loop has no valid TN.

so it looks like some sort of corruption or something to me, maybe an INI would clear it up



Thanks,

Buddy

Linked in Profile
 
right, right crap I say. have you tried pronting 156 0 in 11 instead of just 156? Maybe even further 156 0 0, 156 0 1,

Mato' Was'aka
 
Since the TN numbering works from left to right printing 164 would encompass everything in the loop. I'll give it a try though.
 
REQ: stat 164 0
000 UNIT(S) IDLE
000 UNIT(S) BUSY
000 UNIT(S) DSBL
000 UNIT(S) MBSY
REQ: stat 164 1
000 UNIT(S) IDLE
000 UNIT(S) BUSY
000 UNIT(S) DSBL
000 UNIT(S) MBSY
 
Yes, I know I need to remove it in LD 97 if you look at the original post you see that is what I tried and the error messages I got.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top