Remotly running short codes

[Larryataccess]

I already am setup so i can dial into get messages remotely but I would like to be able to dial in and run short codes like to set a huntgroup into night service and a number of there things. HELP!!!!!!!!!

 

[Larryataccess]

Figured it out it had to be a Assisted transfer and it worked! Thanks all you rock feel free to bounce me for anything i can help on

 

[amriddle01]

Cool, thanks for the update, glad to hear it's working

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[Bas1234]

Nice you have it working.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Larryataccess]

Thanks alot for your time

 

[deanyed02]

Easy solution, try this:
IP Office 5.0(15), VM Pro 5.0(21)

Shortcode: 4080
Feature: Set HuntGroup Night Service
Telephone #: N(whatever huntgroup you wish)

Shortcode: 4081
Feature: Clear HuntGroup Night Service
Telephone #: N(whatever huntgroup you wish)

Voicemail Pro menu:
Press 0 to set NightService
Press 1 to Clear NightService

then...

Assisted Transfer:
Specific, Mailbox: 408 $KEY

I add an email notification in between Menu and Assisted transfer, with content of "Night service has been turned "on" or "off" remotely..."

Works great.

 

[amriddle01]

deanyed02, he could have done that but he wanted two shortcodes to cover all huntgroups, not two shortcodes per huntgroup

ACS - IP Office Implement

"What the Crocodile Hat....was that?