Remote Mini Carrier

[Goliath834]

Succession 4.0 Option 11C
Installing a Mini Carrier Remote via T1 link.
Does anyone have any tips. Do I need to program the cards or can I go with the default.
Any recommendations on the SDI verses MMI.
This is my first install on a remote mini.

 

[hawks]

I beleive you can follow along with the book and be alright. I started to put one in a couple of years back but they changed their mind and went with the MCK remote office. Sorry I could not help you more but I'm sure someone here can get you pointed in the right direction.

 

[hawks]

Is anybody using these lately? don't seem to be.

 

[bzakk]

They work fine you don't have to really do anything different. I have a couple of them and the only time I have trouble with them is when the t-1 goes down..

 

[Goliath834]

Ok I'm able to talk to the local MMI and the remote MMI when physically there. But when logged into either side I can not see the other side. I have RED Card status lights on the cards. When I use the S C command I get from the MMI I get:

"Flash marked uninstalled. Unable to save provisioning to Flash Memory"

Do you have any idea what that might be telling me.

 

[Goliath834]

Update with Remote Carrier:
Ok looks like the books are pretty right on with this installation. We brought the remote cab back and installed it next to the main cab with a T1 crossover cable and everything came up just like it was suppose to. Another lesson learned when dealing with Telco, they swore that it was not a T1 issue and that there was nothing they could do.