remote dial tone access ip office 500

[milkshake456]

I have replaced a system 75 ok I know yuo ask why, but I did. Oh well on the system 75 I had a remote access number that allowed me to use the dail into the system and then access outside lines and internal tie lines. What would be a good configuration on the IP office for this ability.


thank You

 

[intrigrant]

No answer, no luck either. This is not possible on IPO but can be simulated if you have VM Pro.

 

[big70]

Yep, you need VM-Pro.

Greets Peter

 

[aarenot]

with VMPRO, yes.