Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Registy changes 1

Status
Not open for further replies.

x2shy

Technical User
Mar 27, 2001
44
0
0
AU
One for all the NT people.
Changing the following setting will help if you are monitoring you backups.
HKEY_CURRENT_USER\Software\Legato\Administrator\6.0.1.Build.174\Application, change the two settings for Polling interval and Volume/Index polling interval to however many seconds betewn updates you want.The lowest under the admin GUI is 5 but it can be as low as 1 with this hack. The last one probably isn't all that important but alse be warned it will flood your network connection so don't try it from home over dial-up or if you are doing a lot of network intensive work.
BTW this reg change will also work for early versions I just don't know what the earliest version it will work under. 5.1?? Anyone?
 
Very snappy - Thanks! - Bill

"You can get anything you want out of life, if you'll just help enough other people get what they want" - Zig Ziglar
 
You can do the same thing from the admin gui under options/customise. The polling intervals can be set there as well.
 
Yes, but under the GUI it will only let you set it to a min of 5 secs and 10 secs. The Reg hack lets you set it to a lower setting. Hence the post.
enjoy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top