Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reducing dial time
- Thread starter 7balled
- Start date
In System Manager go to:
1. System
2. Telephony
a. Dial Delay Time (seconds)
Reduce this time but be careful. Too much and the system will cut you off before you finish dialing.
You may also press # after dialing. Pressing # is like hitting send on your cell. Otherwise the system waits for additional digits.
The system doesn't know if you are dialing local, ld or international.
1. System
2. Telephony
a. Dial Delay Time (seconds)
Reduce this time but be careful. Too much and the system will cut you off before you finish dialing.
You may also press # after dialing. Pressing # is like hitting send on your cell. Otherwise the system waits for additional digits.
The system doesn't know if you are dialing local, ld or international.
in ARS delete the xN and XXXXN shortcodes and make new ones
1xxxxxxxxxx
dial
1N
your line ID
xxxxxxxxxx
dial
N
your line ID
then all the freaky ones
411
dial
411
your line ID
811,311,511.... all numbers you will need to dial that are not 10 digits or 1 + 10 digits
310xxxx
dial
310N
your line ID
that way your system know exactly how many digits to expect and will dial as soon as you have dialed the last digit, but if you forget something it will not let you dial it so make sure you have all the oddballs covered
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
1xxxxxxxxxx
dial
1N
your line ID
xxxxxxxxxx
dial
N
your line ID
then all the freaky ones
411
dial
411
your line ID
811,311,511.... all numbers you will need to dial that are not 10 digits or 1 + 10 digits
310xxxx
dial
310N
your line ID
that way your system know exactly how many digits to expect and will dial as soon as you have dialed the last digit, but if you forget something it will not let you dial it so make sure you have all the oddballs covered
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
- Status