I have two identical maxtor 120GB SATA HDDs that are using a RAID-0 stripe set. The system temporarily lost one of the disks after a crash causing the computer not to boot any more. Having exhausted all other methods I was forced to delete the Array and create an identical one in the hope it would continie to boot. It didn't work and the message comes up saying disk boot failure. I was using Windows XP professional and I need to recover the data off the disks but I don't know if this is even possible and if so how it can be done. Would appreciate any help regarding the matter.
Regards
Matthew Sixsmith
Regards
Matthew Sixsmith