I have a RAID that had a drive go bad #2...replaced the drive and the rebuild started automatically. Failed within 5 minutes with a Sense key error on drive #5. Data is still available but #2 is offline. This is a Dell server with PERC array unit 600 gb.. Dell says backup, replace both drives and restore. This is a little scary for us for a few reasons so we are looking to try to repair drive #5. Can we defrag, chkdsk, repair an array and/or just that drive. Running a consistency check tonight. The error we are getting is
PERC 3/DC Controller 1, Array Disk 0:5 Sense Key = 3, Sense Code = 11, Sense Qualifier = 2.
Thanks for any ideas.
PERC 3/DC Controller 1, Array Disk 0:5 Sense Key = 3, Sense Code = 11, Sense Qualifier = 2.
Thanks for any ideas.