Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

R3 MM and Lotus Notes Thick Client

Status
Not open for further replies.

Tripp74

Technical User
Aug 27, 2009
13
US
Hello,

We are currently running R3.0 Mod Msg with MSS and using the web client.

Management is looking at rolling out Lotus Notes thick client. ( we use Lotus Notes for email)

I seem to recall reading that the Lotus Notes thick client doesn't play nice with R3.0 MM

Does anyone have experience using this setup..good or bad??

Thanks!
 
Just FYI the 3.0 is not supported any longer so i would upgrade first then roll it out.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
What version of Notes are you running. We installed MM r3.1 when we were on Notes v6 and then upgraded to Notes v8 and I have since seem some issues (it sometimes just stops working). And the MM r3.1 Notes client is not supported on Notes v8. We are just about to upgrade to MM r5.1
 
Bruce,

Thanks for the reply. We are running Notes 6.5.6

I can get voice mails to come into the notes mail box, but the Notes data base won't link up with the MSS. When I input the MSS IP address from the data base, I get an error message from the MM saying "invalid login".

Any idea's why??

I did run this by tier2 at Ayaya, but they couldn't come up with a reason for the error.

Thanks
 
Try using the domain name instead of the IP...

Example: 10.50.100.10 is AVAYAMSS01 - just use AVAYAMSS01 instead of the IP.

I'm running Notes 8.5 with LTC Template Version 4.0.0.3 (4/24/2008) and no hugely evident problems.



Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.
 
98Converter,

I have already tried using the domain name with no luck. I'm about ready to give up and wait for the MM to be upgraded so I can get some tier 3 support.

Thanks for the reply!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top