Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
R11.1 SP2 Gone? 9
- Thread starter dsm600rr
- Start date
chaunymony
Programmer
I just saw that too. Which is fantastic as I have a few customers and ourselves on it, lol!
ACSS-SME
ACIS-SME
ACSS-SME
ACIS-SME
-
3
- #3
IamaSherpa
Instructor
That's true, I suppose the reason is this:
-
2
- #4
-
1
- #6
People still use digital set??? Avaya probably doesn't think so.... ![[noevil]](/data/assets/smilies/noevil.gif "[noevil] [noevil]")
(Sorry I just had to poke fun... Nobody uses H323 phones either)
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
(Sorry I just had to poke fun... Nobody uses H323 phones either)Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
IndianaJonas
Systems Engineer
Yes it`s gone. We also face issues with this release on customer side with the web-services like OneX-Portal, IM and System Status.
This is pretty disappointing!!
This is pretty disappointing!!
Nortel4Ever
Vendor
A couple of bugs I witnessed had to do with User button:
1. The User button did not turn red if the user's phone was unplugged
2. The User buttons could not be edited or changed without removing all User buttons first, then merging, then re-programming the User buttons with the required changes.
I have only installed two small systems with no more than 8 digital phones each and analog trunks and not many features so there could be more wrong with this release than I saw.
1. The User button did not turn red if the user's phone was unplugged
2. The User buttons could not be edited or changed without removing all User buttons first, then merging, then re-programming the User buttons with the required changes.
I have only installed two small systems with no more than 8 digital phones each and analog trunks and not many features so there could be more wrong with this release than I saw.
What a waste of time!
SP2 was due last November, turns up 2 months late and is taken away after 2 weeks!!!
R11.1FP1 is due next week so what is the point even bothering with SP2 as nobody wil use it!!
Jamie Green
[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
SP2 was due last November, turns up 2 months late and is taken away after 2 weeks!!!
R11.1FP1 is due next week so what is the point even bothering with SP2 as nobody wil use it!!
Jamie Green
[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer
We are on it in house only. We have been holding off on 11.1 for quite awhile since release and I'm glad we have. Ironically I'm the only one in the office with a 9508 digital phone and it seems to work just fine with user buttons, etc.. but it isn't running off any of the expansions modules listed in in SOLN359345
-
2
- #13
Same, we have stayed away from R11.1 since release. With R11.1.0.2 we were going to start using it more but I guess that flew right out the window. At this rate R11.1 won't be stable till R12 is released...
The truth is just an excuse for lack of imagination.
The truth is just an excuse for lack of imagination.
Yes, I ran in to a problem and opened a ticket and they told me they pulled it from the download site. So glad they send out a notification or announcement to people (sarcasm).
My problem is upgraded the secondary and primary servers from 11.0.4.5 to 11.1.2. Primary and Secondary upgraded fine. Went to upgrade the 3 500V2 expansions and none of them we able to upgrade. Problem with pushing files to them or files missing. All IP Phones, no digital phones.
My problem is upgraded the secondary and primary servers from 11.0.4.5 to 11.1.2. Primary and Secondary upgraded fine. Went to upgrade the 3 500V2 expansions and none of them we able to upgrade. Problem with pushing files to them or files missing. All IP Phones, no digital phones.
cfritzbflo
Programmer
See this thread opened few weeks back. Tier 3 got back to me on Monday stating they were pulling 11.1SP2 from GA and R&D was working on a replacement SP to fix the issue.
Issue only appears on DS30B1 and DS16B1 expansion modules running in Avaya mode. If in Nortel mode issues aren't seen. DS30B2, DS16B2, DS30 and DS16 modules appear to upgrade and run fine. No word from Avaya Tier 3 yet on when to expect the fix to be published.
-
1
- #16
cfritzbflo
Programmer
bdelmar - We've seen that issue as well - make sure to actually delete all IPO Manager files before installing the new Manager. Appears if you simply just upgrade your manager to a new release without actually deleting the old release - there's issues with files being corrupted or not copied over right.
I heard that a new SP2 should be available until the end of the week.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
G van Hamburg
IS-IT--Management
Freelance Certified Avaya Aura Engineer
- Status
Similar threads
