"system IPv4 firewall is ok" SNMP trap every hour

[jallen2020]

I just turned on SNMP for an R6.0 S8300 system, and am getting the following trap from a the system every hour....anyone know what this means? google searches have only brought up the alarm definition sheet, but that doesnt have anything to say about this particular alarm, only that it exists. IP's and host names have been changed to protect the innocent

At 2/26/2014, 6:00 PM (UTC -0600)
Condition: SNMP TRAP received
OID=1.3.6.1.2.1.1.3.0 Name=sysUpTime Value=01:17:03.5800000

OID=1.3.6.1.6.3.1.1.4.1.0 Name=snmpTrapOID Value=1.3.6.1.4.1.6889.1.8.1.0.12 (Avaya Communication: g3-products)

OID=1.3.6.1.4.1.6889.2.8.2.1.1.1.4 Vendor=Avaya Communication Name=mibs Value=main1cm1

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.18 Vendor=Avaya Communication Name=mibs Value=1000999999

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.17 Vendor=Avaya Communication Name=mibs Value=FPA:00000:0000000000:0226190003::N

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.1 Vendor=Avaya Communication Name=mibs Value=*:"system IPv4 firewall is ok"

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.3 Vendor=Avaya Communication Name=mibs Value=_LX

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.4 Vendor=Avaya Communication Name=mibs Value=6

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.6 Vendor=Avaya Communication Name=mibs Value=

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.26 Vendor=Avaya Communication Name=mibs Value=10.10.25.11

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.27 Vendor=Avaya Communication Name=mibs Value=

OID=1.3.6.1.4.1.6889.2.8.1.4.6.1.28 Vendor=Avaya Communication Name=mibs Value=

 

[jallen2020]

bump.

 

[jallen2020]

bump

 

[kyle555]

the avaya knowledge base says they fixed that in 6.0.1 service pack 8