Hopefully this is a simple issue. I have an used IP500V2 that I bought to learn and tinker with.
I got the system with an SD card with the preferred edition license already installed, running on version 6. I also bought the IPO Small upgrade to R8.1 online. Since it was a used system I backed up and formatted the card using IP Office manager and installed all the licenses, which now show up as Valid. So far, so good.
I also bought an IP400V1 16 port digital external expansion with the Avaya branded blue connection cable. However when I open Avaya Office R8 Manager I do not see the 16 port digital module at all. But when I open Avaya Office R8 System Status application, I get the following message at the bottom of the screen. "External Modules Disabled - Unlicensed" I have borrowed a 30 port expansion and 2nd Avaya cable, but I get the same results.
What license or step am I missing? Thanks in advance!
I got the system with an SD card with the preferred edition license already installed, running on version 6. I also bought the IPO Small upgrade to R8.1 online. Since it was a used system I backed up and formatted the card using IP Office manager and installed all the licenses, which now show up as Valid. So far, so good.
I also bought an IP400V1 16 port digital external expansion with the Avaya branded blue connection cable. However when I open Avaya Office R8 Manager I do not see the 16 port digital module at all. But when I open Avaya Office R8 System Status application, I get the following message at the bottom of the screen. "External Modules Disabled - Unlicensed" I have borrowed a 30 port expansion and 2nd Avaya cable, but I get the same results.
What license or step am I missing? Thanks in advance!