chichitsai
Technical User
I am connecting my norstar and noticed that the phone lines has 4 color lines (Yellow, green, red & blue). Which 2 should I connect to the my norstar?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Question regarding connecting norstar to phone
- Thread starter chichitsai
- Start date
- Status
First of all - a Norstar set will not work on a POTS line (Plain Old Telephone Service), the set needs to talk to a Norstar system.
This set is digital and only gets the programming via the system.
If you are attaching the set to the system, Red and Green are the colours that you need to hook up the phone.
Good Luck and Merry Christmas.
This set is digital and only gets the programming via the system.
If you are attaching the set to the system, Red and Green are the colours that you need to hook up the phone.
Good Luck and Merry Christmas.
- Thread starter
- #3
chichitsai
Technical User
can you clarify about POTS? I am using those phone lines that has 4 colors (I guess with a RJ-14 Pin). And I will connect both lines (the red and green) to my block.
curlycord
Programmer
Norstar phones need a phone system to run them....do you have?
POT's = normal dial tone such as a residence.
But normal is green and red yes.
=----(((((((((()----=
curlycord
POT's = normal dial tone such as a residence.
But normal is green and red yes.
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question