QSIG and DSS1 on a MD110

[siadna]

Hi there,

Suppose you have a MD110 with a number of TLU76 boards. As you know, they can be used for DSS1 or QSIG.

What I would like to know is what printouts could be used to prove that one board is using QSIG or DSS1 and if one wanted to adapt a particular TLU76 board to be changed from using QSIG to DSS1, what MML commands would be needed?

Thanks/James

 

[cedvesta]

Use commands RODAP:ROU=ALL;
This command give you the parameters needly.
For interpretation read ALEX guide.
Bye

 

[HIREI]

Hi,
parameters VARI or VARO.

 

[mundus]

Hi´
Table 4 Value of D 4 (VARI)

DSS1 Network Side supported
Yes = 1, 3, 5, 7, 9, B, D or F

 

[HIREI]

Hi, mundus,
imho, it's from another opera:
DSS1 Network Side allows MD110 acts as Network, and no User in PRI connection i.e. Public network, not in QSIG, i.e. Private network.

 

[HIREI]

Table 4 Value of D 4 (VARI)
0 - 3 ECMA QSIG
4 - 7 ISO QSIG
8 - B ECMA&ISO QSIG
C - F Reserved

Although, for BC9.