I am about to attempt to turn up a cisco router over frame-relay thru an integrated T-1 device. (an Adtran TSU600) The phone company provided me with the following info:
DS1 channels 1-12 voice Channel 13 FRAME 14-16 spare and 17-24 Internet. The following staements were also provided:
FRAME- LMI is Autodetect and DLCI is 102
Internet- encapsulation is HDLC (if cisco) or PPP if any other brand
This makes absolutely no sense to me. I'm used to using a Carrier Access Adit600 and simply configure the unit for a combination of voice and data and then configure the router using IETF and a sub-interface ETC.... Does anyone have any idea what they mean by this FRAME on channel 13??? How would I configure a DLCI on the router if they are telling me the encapsulation is HDLC??? I've called the provider but only get more confusion. I've spoken with the manager who seems to know even less.
Thanks so much.
DS1 channels 1-12 voice Channel 13 FRAME 14-16 spare and 17-24 Internet. The following staements were also provided:
FRAME- LMI is Autodetect and DLCI is 102
Internet- encapsulation is HDLC (if cisco) or PPP if any other brand
This makes absolutely no sense to me. I'm used to using a Carrier Access Adit600 and simply configure the unit for a combination of voice and data and then configure the router using IETF and a sub-interface ETC.... Does anyone have any idea what they mean by this FRAME on channel 13??? How would I configure a DLCI on the router if they are telling me the encapsulation is HDLC??? I've called the provider but only get more confusion. I've spoken with the manager who seems to know even less.
Thanks so much.