Programing LCR for SV8100 to use SV8500 trunks for telco acces

[LDthirtytwo]

Hi guys
How do I program an SV8100 with TDM CCIS to an SV8500 as its only access to outside trunks? I inherited this system from a tech who’s just left and I can’t dial Long Distance from the 8100. Internal CCIS calls, 800 and Local calls I can dial but LD calls will not go out, either I get a busy or Telco intercept message with my programming changes.
Here is what I found
11 01
1X 1 FRT
2X 5 DEA
3X 1 FRT
4X 1 FRT
5X 1 FRT
6X 3 SVC CODE
7X 1 FRT
8 1 NOT USED
9X 1 FRT
0X 1 NOT USED
*X 2 SVC ROUTE
#X 0 NOT USED
44 02
001 7 FRT 1
002 5 FRT 1
003 92 FRT 2
004 93 FRT 1
005 94 FRT 2
006 95 FRT 2
007 96 FRT 2
008 97 FRT 2
009 98 FRT 2
010 99 FRT 2
011 12 FRT 3
012 13 FRT 3
013 14 FRT 3
014 15 FRT 3
015 16 FRT 3
016 17 FRT 3
017 18 FRT 3
018 18 FRT 3
019 1011 FRT 4
020 91888 FRT 5
021 3 FRT 1
021 4 FRT 1
023 91800 FRT 5
024 91877 FRT 5
025 91866 FRT 5
026 91855 FRT 5
027 2@@@@ FRT 1
I inserted
027 91 FRT 6
028 2@@@@ FRT 1

44 05
FRT 1
01 TRK GRP 1
09 MAX DIGITS 5

FRT 2
01 TRK GRP 1
09 MAX DIGITS 8

FRT 3
01 TRK GRP 1
09 MAX DIGITS 11

FRT 4
01 TRK GRP 1
09 MAX DIGITS 18

FRT 5
01 TRK GRP 1
09 MAX DIGITS 12

I ADDED FRT 6
01 TRK GRP 1
03 6
09 MAX DIGITS 12

45 06
006 I’ve tried 9, 99, 91
What is the best way to program this up so it works, anyone got a cheat sheet to program LCR in the 8100?

 

[belevedere]

See

http://www.nectekhelp.com

for 8100 ARS and peer to peer CCIS. They may help.

 

[LDthirtytwo]

Thank you for your reply Belevedere.
1 Is there a way in the 8100 to see what digits are sent across the TDM CCIS span like the the commands IPMT or CCIS
trace in the 85/8300's?.
2 Do I have to setup ARS in the 8100 to be able to dial Long distance calls, local & 800 calls are working( as it's not setup yet)?
Thank you
LD 32

 

[belevedere]

If you are using PCPro for the 8100, then look into some of the tools available on the top bar.
Yes, you need ARS to dial long distance when using the trunking over another switch.

 

[mudhoney]

Im currently trying to implement 8100 to 8500 ccis having issues getting d-channel to come up. any chance you could send a copy of 8100 database?