Programing an ISDN extention

[tdmulor]

Hi i have a customer that need to have a ISDN extention. they have BRI and uses 3 of the 4 ports my idée is to use the 4:th port for this.

I wonder if anyone has done this and could give me hints about with forms to use and so on.

System configuration:
Type: 3300Cx
Software: release 8.x
Trunks: BRI

Regards UO

 

[T8keiteasy]

Hi,

You have to use ARS...
It means that you declare a BRI trunk such as you did for the 3 one.
I don't remember, but you may have a S bus cell to tick.
As far as I remember, you hacve to declare fixed or not TEI (depending on the protocole of buses)...but this is ISDN classic.

In ARS form, you just declare a number (the ISDN extension) to go to this new trunk ...

Is it ok for you ?

Now, it's about French users too !!!