A little help please! I am trying to connect to my 61C/11C via procomm plus/hyper terminal, but I am having no luck. Can someone please tell me what I am missing? Thank you.
[ul]
[li]Set the port on Procomm (like COM1 or whatever)[/li]
[li]Set the speed to 9600 bps and 8N1[/li]
[li]Terminal type VT220 will work with both systems you listed.[/li]
[li]Make sure you switch between a straight cable and a null modem cable (or add a null modem adapter to your existing cable) to see if all you need is to switch the SD and RD pins.[/li]
[li]Make sure the correct CPU is active. If you are on the core, you want to be on the active core.[/li]
[/ul]
ansi bbs, 8 none one at 9600 is a good place to start.. might need a nul modem IF both ends match.. one needs to be dce, the other dte.... you can short pins 2 and 3 in the db45 to test the pc.. that allows typing on screen, but nothing else...
on a large switch, start with j25/j26 instead of the paddle boards, those talk to the ACTIVE core.. so rear of the active core NO chance of it not being default..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.