Problems with Branch Office Tunnel BSR222 & BCM50e

[D43]

Hi, I am testing a BSR222 and a BCM50e(the same UI as BSR22)
and I just cant get Right to configure the Branch Office Tunnel.
I´ve read the "SMB Solutions Overview and Configuration Guide".
I want to know, if i have to set the connection type "branch Office" on both routers and their respective configuration on each.
This is the way I have configured it, but still dont get anything on the SA monitor.

My goal is to setup the tunnel correctly for data, and then telephony services (and that is going to be a challenge too). both sites have a BCM, a BCM400 at main site and the BCM50 in the remote site and using it as a VPN router.

Any help is more than welcome.
if anyone has any notes or personalized configuration guides would be great.

 

[D43]

well, no body replied to my thread, I finally got the tunnel right, I just had some issues with the config. information on the Encryption Algorithm, it wasn´t the same on one of the other BSR. Just one small detail I dind´t noticed.
my tunnel no is up and running.