Problem with call forwarding HIPATH 4000 V6 2

[youfo007]

hello,

We have HiPath 4000 V6
I have problem with call forwarding

Situation 1:

I receive call from external user (ex. another trunk isdn s2conn) and transfer to another our local user. I receive no answer or busy tone.

Situation 2

I receive call from external user (ex. another trunk isdn s2conn) and I'd like transfer to our other external user through a link. I receive no answer or busy tone.

When I receive no answer or busy tone, the situation remains like this.

I tried to check several parameter (feasu, ziel, COS1, cos2, lcosv1, zand) and the problem still persists.

this is the command I use:


ADD-ACTDA:STN,7854,FWD,STATIONV,CFU,GEN,VCE,6312548;





thanks for any advice

best regards

 

[youfo007]

yes I'm a technician, I work on Siemens and Alcatel PABX as also on the CUCM 9.1 IP voice CISCO.

 

[sbcsu]

Great.
I suppose the Alcatel is 'clearer' than the Siemens
I do a bit on the Cisco kit myself but not much.

 

[youfo007]

yes exactly, Alcatel is a little light on the documentation and the config, but is too siemens solid side hardwar.

but the fact of thinking to make a forum like this, it is extraordinary.

thank you all!