Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with call forwarding HIPATH 4000 V6 2

Status
Not open for further replies.

youfo007

Technical User
Nov 4, 2012
50
MA
hello,

We have HiPath 4000 V6
I have problem with call forwarding

Situation 1:

I receive call from external user (ex. another trunk isdn s2conn) and transfer to another our local user. I receive no answer or busy tone.

Situation 2

I receive call from external user (ex. another trunk isdn s2conn) and I'd like transfer to our other external user through a link. I receive no answer or busy tone.

When I receive no answer or busy tone, the situation remains like this.

I tried to check several parameter (feasu, ziel, COS1, cos2, lcosv1, zand) and the problem still persists.

this is the command I use:


ADD-ACTDA:STN,7854,FWD,STATIONV,CFU,GEN,VCE,6312548;





thanks for any advice

best regards
 
yes I'm a technician, I work on Siemens and Alcatel PABX as also on the CUCM 9.1 IP voice CISCO.
 
Great.
I suppose the Alcatel is 'clearer' than the Siemens :)
I do a bit on the Cisco kit myself but not much.
 
yes exactly, Alcatel is a little light on the documentation and the config, but is too siemens solid side hardwar.

but the fact of thinking to make a forum like this, it is extraordinary.

thank you all!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top