Primary to LSP

[ONsiteengineer]

Hi,

I have primary and lsp both are s8300 which is stack together in different gateway. If i do disp alarms and errors in the primary to check for alarms, will it check the LSP as well? I know this is easy. thanks a lot..

 

[dj42Avaya]

The LSP is in a dormant state. The gateway that it resides in will be registered to the primary 8300 and alarms from the circuit packs in that gateway will be handled by the primary 8300. For gateway alarms, set up your snmp community string and snmp traps.