Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI In Hong Kong 1

Status
Not open for further replies.

nicka29

Technical User
Apr 6, 2009
269
GB
hi

Just wanted to know if anybody has got any experience with PRI\T1 lines in Hong Kong.

I can get inbound working but when i dial out I get the message "CMCauseBearerCapabilityNotImplemented" .

It seems to use enbloc but when I dial out it just comes out saying number busy

Thanks in advance

Nick
 
Stupid question, you do have the systems region is set to Hong Kong?

Capture_ni16ix.png


And HK I would have thought use ETSI signalling?

ACSS - SME
General Geek

 
Here is a link to a document showing the pertinent areas of the Hong Kong system my company manages. This has been in place for several months without issue and was installed and configured by a local HK engineer.


System is set to U-LAW
Line is set to PRI
No ARS is used
[9]N shortcode used for outdialling



| ACSS SME |
 
Hi

Thanks for your responses.

Managed to speak to an avaya partner here in Hong Kong early this morning. One of the changes that o would never of hot was in the T1 option I had to change NIC2 to DES300. Once this was changed all came up

Thanks

Nick
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top