I'm switching from a BCM400 to IPO system. When I tested the line this past Saturday night, it didn't work. I plugged the line into the correct IPO port, the LED on Comcast equipment stay red.
SWITCH TYPE: NI2
CHANNEL ALOC: 23>1
CLOCK QUALITY: NETWORK
HAUL: 0-115FT
LINE SUB TYPE: PRI
ADMIN: IN SERVICE
PROVIDER: LOCAL TELCO
FRAMING: ESF
ZERO SUPP: B8ZS
LINE SIGN: CPE
INCOMING DIGITS: 4
CRC: ON
Line works fine with BCM. Anything I should check?
SWITCH TYPE: NI2
CHANNEL ALOC: 23>1
CLOCK QUALITY: NETWORK
HAUL: 0-115FT
LINE SUB TYPE: PRI
ADMIN: IN SERVICE
PROVIDER: LOCAL TELCO
FRAMING: ESF
ZERO SUPP: B8ZS
LINE SIGN: CPE
INCOMING DIGITS: 4
CRC: ON
Line works fine with BCM. Anything I should check?