Pre-program PRI on Magix

[HiDesert]

Question for those who know???
I have a PRI cutover in several months. I have already installed
the 100DCD card in the switch...
I want to start programming the parameters of the PRI, 3 to 5 days
before the cut date...will this PRI programming interfere with the Magix without
the CKT being turned up.
I don't like waiting for the cut date to attempt the PRI programming.
Any thoughts!!!!!

 

[Telecomboy]

You can program the PRI ahead of time. Just don't assign the pool for those lines to the ars dial-out yet.

 

[HiDesert]

Thanks for the confirmation.
Yes, I know the main pool has to be
changed once the ckt is activated.

 

[mojo69]

The Magix PRI cheat sheet is something that I have found useful. It also includes the required emulation for provisioning the providers ckt. HAS TO BE ATT CUSTOM. NI2 and industry standard PRI's simply don't work unless the provider provisions the ckt correctly.

 

[merlinman]

True that, NI2 won't cut it!

BTW, where's this "Cheat Sheet"?

http://home.comcast.net/~merlinman

-merlinmansblog.blogspot.com

 

[TouchToneTommy]

In the FAQ section of this very forum!

http://www.tek-tips.com/faqs.cfm?fid=3784

http://www.tek-tips.com/faqs.cfm?fid=7240

http://www.tek-tips.com/faqs.cfm?fid=7666

http://www.tek-tips.com/faqs.cfm?fid=4279

 

[HiDesert]

Thanks to you all for your time.
I have all the cheat sheets and doc's
regarding the install of a PRI.
With you help my previous install was
a 100% success.
I will need to program the DS1 card &
PRI parameters before the cutover...
I have all I need to do that.