Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Polycom IP7000 on Ipecs 300

Status
Not open for further replies.

qldlgtech

Technical User
May 11, 2011
17
AU
How to i get an Polycom IP7000 (IP Conference Phone )to work on Ipecs 300.Thanks
 
Find the IP address of the MFIM (Main module) and register the Polycom towards that ip address.
In PGM102 enter the IP address of your Polycom IP7000 (IP Conference Phone).
A detailed description exists on how to register IP phones towards the iPECS -here in this forum.

///doktor
 
Hi Doktor, Thanks for that ,however i cant find the detailed description in this forum ? can you send me the link pls ,or if its that link below your comments ,unable to read as its in a foreign language.
 
It is just Danish language ;-)).

You can use this one: thread1613-1484637: How to program an IP phone in ipLDK-100!!The command structure of the ipecs-300 is similiar to ipLDK-100.
In PGM 102 of the iPECS you will find a list of all registered units and phones. Here you add your conference phone.

///doktor
 
I have tested the IP700 with an MFIM300 and I still have made some configuration screenshots. If you need it pls let me know your mail address.
BR/xs
 
Xs650 can you pls send screenshots rob@commitel.com.au
 
Can you send me me the screen shots as well on petrosmuchato@gmail.com

Dial Tone shoul be There
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top