Polycom IP7000 on Ipecs 300

[qldlgtech]

How to i get an Polycom IP7000 (IP Conference Phone )to work on Ipecs 300.Thanks

 

[doktor]

Find the IP address of the MFIM (Main module) and register the Polycom towards that ip address.
In PGM102 enter the IP address of your Polycom IP7000 (IP Conference Phone).
A detailed description exists on how to register IP phones towards the iPECS -here in this forum.

///doktor

http://www.kandu.dk/spg153996.aspx

 

[qldlgtech]

Hi Doktor, Thanks for that ,however i cant find the detailed description in this forum ? can you send me the link pls ,or if its that link below your comments ,unable to read as its in a foreign language.

 

[doktor]

It is just Danish language ;-)).

You can use this one: thread1613-1484637: How to program an IP phone in ipLDK-100!!The command structure of the ipecs-300 is similiar to ipLDK-100.
In PGM 102 of the iPECS you will find a list of all registered units and phones. Here you add your conference phone.

///doktor

http://www.kandu.dk/spg153996.aspx

 

[doktor]

If your Polycom IP7000 (IP Conference Phone) is a SIP phone, it is different: Use this link.

thread1613-1548786


///doktor

http://www.kandu.dk/spg153996.aspx

 

[xs650]

I have tested the IP700 with an MFIM300 and I still have made some configuration screenshots. If you need it pls let me know your mail address.
BR/xs

 

[doktor]

You can send it to mine. Follow link and see the details at the buttom:

http://www.kandu.dk/spg153996.aspx

///doktor

http://www.kandu.dk/spg153996.aspx

 

[qldlgtech]

Xs650 can you pls send screenshots rob@commitel.com.au

 

[Chamvari]

Can you send me me the screen shots as well on petrosmuchato@gmail.com

Dial Tone shoul be There