I just purchased an 840N and have found that one of the 5 'blue tabs') that sit a couple of mls above the drum and seem to act as a guide for the papaer has broken (still attached however rubs against the drum and subsequently leaves a 1/12 inch vertical smudge down one side of the printed paper. I deperately need some advise on how to either 1: obtain another whole piece containing all 5 tabs on athe horizontal bar or 2: can I take this 'hanging tab off and solve the problem or 3: it seems like i may be able to super glue this back but I have no idea of the pressure - if any is placed on these tabs and therefore I will be just prolonging an inevitable recurring problem.
I hope you can help me out with this - im technically challenged and trust that you can steer me in the rightr direction!
Thanks
Eoin
I hope you can help me out with this - im technically challenged and trust that you can steer me in the rightr direction!
Thanks
Eoin