Greetings, I have a Phaser 740 that has been producing some horrible printouts lately. The imaging unit, charge grid and all toner cartridges have all been replaced. The fuser has not, but is at 78% of its life cycle along with the fuser roll and transfer kit (give or take acouple %'s). I have included some images of the problem I have been experiencing on the following site;
Has anyone ever experienced similar printouts? Will replacing the fuser/roll/transfer kit most likely fix the problem? if none of the above work it looks like im draggin this thing to a service center.
Has anyone ever experienced similar printouts? Will replacing the fuser/roll/transfer kit most likely fix the problem? if none of the above work it looks like im draggin this thing to a service center.