Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PDT mode ??
- Thread starter badro25dz
- Start date
bigindian65
Technical User
if you are at that prompt, you are logged into pdt.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #3
bigindian65
Technical User
You don't know the password do you. I can't go into the simple mode in which you access pdt, if you have the password, you would have to know. sorry.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #5
bigindian65
Technical User
PDT is Problem Determination Tool and puts you on the code level of VxWorks, thor, cpp, unix. It is the code level of the pbx, added over the years are more Vendor friendly CLI for patches, etc. wrong move = dead switch. unauthorized use = dead forever switch, no Nortel support, possible prosecution.
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #7
- Status
Similar threads
