Patches for MD110

[shalamar]

There have been having problems on the E1s interconnecting a router 7206 to MD110 PBX. All calls terminating on the PBX via the router are not diverted to the Voicemail system on 'No Answer'. I have done fault finding on this problem and i believe that patches from Ericsson will fix it.

I need to know if indeed there are patches to fix this problem and how it can be gotten.

 

[fcpli]

What kind of fault "finding"? Which version? Which protocol? Any traces with the fault active? A little bit more specific, please.

 

[shalamar]

The version is BC11, Protocol is now National ISDN.

I was using QSIG but experienced fast busy on the channels consistently. A status of the channels show idle but a trace on the router shows that the pbx is rejecting calls. I have since changed to National ISDN but since then we can't make use of QSIG features such as call forwarding, name display....

I need to know if there are corrective patches for the QSIG issues and how it can be gotten.

Thanks.

 

[shalamar]

Below are the route parameters. to be more specific.BC11SP12/R2A

<RODAP:ROU=6;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
6 SL60 H'00000310 H'15400000 H'06004010 NO

END

<ROCAP:ROU=6;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
6 711000000000001 7 3110000010 0 5 128 00151515 211110000031 111111

END

<RODDPEST=3;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
3 6 000500000000025000000000 0 1 0