Password to access installer guide On MICS 4.0 CD

[serge9]

here is what it says on the doc
"MICS 4.0 Installer Guide (English or French) requires a password before it can be viewed using Acrobat Reader. This password is the same as the default Installer password used to begin a Norstar programming session.
Refer to the paper version of the Modular ICS 4.0 Installer Guide that comes with your MICS 4.0 software for this default password.

i tried the installer Password
with ** and without **
it did not work
any help will be much appreciated

serge9

 

[lugerlover]

try norstar99

 

[serge9]

Thank you Lugerlover
but it did not work
i get the same error message
"the password is incorrect. Please make sure that caps lock is not on by mistake, and try again

?

Thanks
serge9

 

[sfwi]

I assume you already tried 266344 ?

 

[exsmogger]

Try "config"

Brian Cox

http://www.jandjcommunications.com

 

[commnorth]

You have to enter 266344 266344.

 

[serge9]

I tried the Config (default installer password)
did not work
tried config twice as Comnorth suggested (with space and without space) did not work?

Thanks

serge9

 

[exsmogger]

Did you actually type the word config? NOT 266344.

Brian Cox

http://www.jandjcommunications.com

 

[serge9]

off course NOT
i entered the password 266344 as you would enter it on a phone set
i even tried it with **

thanks Brian

Serge9